Formula RO Disc Brake System


The first disc brake to use oval pistons?ever. As in worldwide, in any application of disc brakes from F1 cars to Super Bikes?the mega powerful Formula RO Disc Brake pushes stopping power to new, uncharted levels in a lightweight package. While multi-piston calipers have been the go-to layout when power was the goal, they suffer from complex manufacturing, additional weight, and more moving parts (read: maintenance). The demands of top-tier downhill mountain bikes require as little mass as possible without hindering power or strength, and the oval pistons in the RO's caliper provide just that.While an oval piston is the highlight of the RO, the pistons' heat-ditching technology also deserves attention. Made from an ultra-stiff composite, the piston is concave on the fluid side to increase heat-transferring surface area, while the pad side is grooved to promote a cooling air flow. Aside from the surface area maximizing oval piston, the RO's caliper is a monobloc design, meaning there's no seam to flex when applying eyeball-elongating stopping pressure. The caliper has venting windows both top and bottom to keep things from sizzling on hot summer-time lift runs?the top vent also allows easy pad change with the wheel still mounted.Up on the bars, Formula employs its high-capacity forged aluminum radial master cylinder. This design offers an excellent leverage ratio, minimal flex, and maximum fluid storage. It also allows you to run moto style without swapping lines or affecting bleed port access. Formula's Tool Free Reach Adjustment knob allows simple tuning of the forged aluminum lever blade for optimum ergonomics, while The Feeling Control System makes tweaking of lever stroke or compensation of pad wear a simple endeavor.In between the groundbreaking caliper and proven master cylinder resides a lightweight woven polyester hose that resists expansion from heat and line pressure for a nice, consistent lever feel. Formula uses DOT 4 brake fluid because of its resistance to thermal expansion, moisture absorption, and the quality control inherent with DOT-approved products, no matter what brand or where you get it.At just 361 grams for a front brake with rotor, the Formula RO Disc Brake achieves a weight that?ll ruffle feathers of dedicated cross-country brakes. But, don't let that weight-weenie factoid dissuade you from maching double black diamond runs with the RO?this is a DH-oriented unit. The RO is packaged with all the pieces needed to set up one brake on one wheel except for rotors and adapters (sold separately)?it's a pre-bled lever/hose/caliper with pads.Please note: almost all hydraulic brake lines need to be cut to size before a bike is properly shod with hydraulic disc brakes. You'll need a quality cable-cutter like the Park CN-10 and a spoke to first cut and then de-crimp the housing.


Showing 1-3 of 3  
[May 25, 2019]


Great modulation, loads of power, one finger braking, totally reliable, easy to bleed and easy to set up.


The level pivot wears after a couple of seasons of good use causing the levers to rattle a bit. You need to replace the levers to so this which isn't cheap. If they ran on ball bearings it it was just a cheap bushing to replace the brakes would be perfect.

Price Paid:
Model Year:
[Jun 23, 2017]
All Mountain Rider


Preaty low strength. It becomes a little bit stronger when it get hotter, and at that moment it is too hot to maintain strength.

I am 115 Kg weight and this brake wont stop me as I expect, when I expect


Non linear breaking modulation (strenght is not linear). And a lot of turkey wobble. Too much vibration

Very low power brake.
Weak modulation.
Too much turkey wobble.
Too much vibration.

[May 27, 2012]


Powerful - very powerful, noticeably more powerful than 'The One's and saints (can't compare to anything else that's equivalent), but without sacrificing decent modulation and weight. They have a very sleek elegant design. Only had them currently on the bike for 6 months and so far they have been reliable and fickle free.
Currently I have not found a hill steep or long enough to cause fade or heating issues.
They use the same pads as 'The Ones' so there's lots of aftermarket choice available.
As a dedicated downhill brake these should be at the top (or near to) of your list as potential purchases.


Cost - way to expensive when compared to other quality options.
Bleeding, just like 'The Ones' these require a perfect bleed.
People always ask questions when riding, but a bad thing if you like chatting, if you're an anti-social hermit avoid these brakes.

Only a 3 for value rating as they are expensive, then you need to buy the rotors and adapters on top of that price (so add another 50+ per end). I hid the reciept so my wife doesn't cut my balls off, but that being said, so far my experiences justify the cost of RO's.I bought these as an upgrade to 'The Ones' which i was quite happy with but just wanted a little more power (I'm 250lb) and I am very glad i did, now i have 'The Ones' on my Am bike.

I used Magura Gustavs for 9 years, and this is the first brake I have found that equals the raw power of Gustav's, but at nearly half the weight. I have no idea of the potential issues regarding the ovalised piston, whether it will last or not.

If you willing to spend the money and want some light weight, elegant and very powerful brakes, you will not be (hopefully) disappointed.

Similar Products Used:

Magura Gustav
Formula 'The Ones'
Shimano Saint

Also ridden Avid Codes and hayes on friends bikes.

MTBR Newsletter

Get the latest mountain bike reviews, news, race results, and much more by signing up for the MTBR Newsletter




© Copyright 2021 VerticalScope Inc. All rights reserved.